Отличная рама, сам пластик и штамповка ровные и качественные. Моторчик входит без проблем и сидит плотно. На нижней стороне "ножки" мягкие, силиконовые - довольно упругие Дождусь контроллер и в полет!

Отличная рама, сам пластик и штамповка ровные и качественные. Моторчик входит без проблем и сидит плотно. На нижней стороне "ножки" мягкие, силиконовые - довольно упругие Дождусь контроллер и в полет!

Отличная рама, сам пластик и штамповка ровные и качественные. Моторчик входит без проблем и сидит плотно. На нижней стороне "ножки" мягкие, силиконовые - довольно упругие Дождусь контроллер и в полет!

I did not like the induct system on the Eachine Bumble bee 95, so I got this king kong 100 frame transferred everything over from the bumble bee, including the canopy, minus the props, I bought some 3 blade props to use and the thing soooooo much better with this setup.

I did not like the induct system on the Eachine Bumble bee 95, so I got this king kong 100 frame transferred everything over from the bumble bee, including the canopy, minus the props, I bought some 3 blade props to use and the thing soooooo much better with this setup.

I did not like the induct system on the Eachine Bumble bee 95, so I got this king kong 100 frame transferred everything over from the bumble bee, including the canopy, minus the props, I bought some 3 blade props to use and the thing soooooo much better with this setup.

Light enough, and maybe more durable than Carbon fiber. I built mine as just a flyer without FPV. First I set it up with a simple Blade Nano QX board, but later I swapped it for a Beecore F3 EVO Acro board so I could fly stunts. Part of the motor is enclosed in housings, so watch motor temps (reduced air cooling). Plenty of room for 65mm props. I set mine up a bit differently than Bang Good shows, with my battery slung underneath. .. See photos. If I mount a cam later, I'll use an Eachine TX01S or similar, with the cam up front and the separate VTX mounted on the tail.

Light enough, and maybe more durable than Carbon fiber. I built mine as just a flyer without FPV. First I set it up with a simple Blade Nano QX board, but later I swapped it for a Beecore F3 EVO Acro board so I could fly stunts. Part of the motor is enclosed in housings, so watch motor temps (reduced air cooling). Plenty of room for 65mm props. I set mine up a bit differently than Bang Good shows, with my battery slung underneath. .. See photos. If I mount a cam later, I'll use an Eachine TX01S or similar, with the cam up front and the separate VTX mounted on the tail.

Light enough, and maybe more durable than Carbon fiber. I built mine as just a flyer without FPV. First I set it up with a simple Blade Nano QX board, but later I swapped it for a Beecore F3 EVO Acro board so I could fly stunts. Part of the motor is enclosed in housings, so watch motor temps (reduced air cooling). Plenty of room for 65mm props. I set mine up a bit differently than Bang Good shows, with my battery slung underneath. .. See photos. If I mount a cam later, I'll use an Eachine TX01S or similar, with the cam up front and the separate VTX mounted on the tail.

ottimo frame per mini quad FPV con motori 8x20

ottimo frame per mini quad FPV con motori 8x20

ottimo frame per mini quad FPV con motori 8x20

Now i have 6x of these King Kong Q100 micro racer. They are extremely durable frame, smashed, wacked and bashed like no tomorrow and still holding well with minor chips, scraps or cracked around the rotor placeholder which can easily fix with glue or zip ties. Easy to to add flight controller, FPV units in any configuration with or without canopy. The are also hansomely looks goodsin apppearance, some people mistakenly identify it as baby DJI Spark, lol.

Now i have 6x of these King Kong Q100 micro racer. They are extremely durable frame, smashed, wacked and bashed like no tomorrow and still holding well with minor chips, scraps or cracked around the rotor placeholder which can easily fix with glue or zip ties. Easy to to add flight controller, FPV units in any configuration with or without canopy. The are also hansomely looks goodsin apppearance, some people mistakenly identify it as baby DJI Spark, lol.

Now i have 6x of these King Kong Q100 micro racer. They are extremely durable frame, smashed, wacked and bashed like no tomorrow and still holding well with minor chips, scraps or cracked around the rotor placeholder which can easily fix with glue or zip ties. Easy to to add flight controller, FPV units in any configuration with or without canopy. The are also hansomely looks goodsin apppearance, some people mistakenly identify it as baby DJI Spark, lol.

It arrived very well with time and in excellent conditions, the product fulfills all its functions mentioned, 100% recommended for the projects and products made.

It arrived very well with time and in excellent conditions, the product fulfills all its functions mentioned, 100% recommended for the projects and products made.

It arrived very well with time and in excellent conditions, the product fulfills all its functions mentioned, 100% recommended for the projects and products made.

nickel, livraison rapide et très bien emballer. matériel irréprochable et site a conseiller.

nickel, livraison rapide et très bien emballer. matériel irréprochable et site a conseiller.

nickel, livraison rapide et très bien emballer. matériel irréprochable et site a conseiller.

Πολύ ωραίο να φτιάχνεις βουρτσισμένο ντρόουν. Είναι πολύ ελαφρύ και έχει αρκετό χώρο για μέρη. Έχει μια μικρή τεχνική δυσκολία να αποφασίσει μονάδες... Fc, Cam, vtx κτλ...

Very nice to build brushed drone. It is very light and has enough space for parts. It has a little technical difficulty for deciding units... fc, cam, vtx etc...

Πολύ ωραίο να φτιάχνεις βουρτσισμένο ντρόουν. Είναι πολύ ελαφρύ και έχει αρκετό χώρο για μέρη. Έχει μια μικρή τεχνική δυσκολία να αποφασίσει μονάδες... Fc, Cam, vtx κτλ...

This is a very cool diy frame, you can build an qx90 or qx95 on to this frame. The cam hole is a little tight and needs cutting. But the strength of the frame feels nice, also do the little rubber knobs on the landing gear.

This is a very cool diy frame, you can build an qx90 or qx95 on to this frame. The cam hole is a little tight and needs cutting. But the strength of the frame feels nice, also do the little rubber knobs on the landing gear.

This is a very cool diy frame, you can build an qx90 or qx95 on to this frame. The cam hole is a little tight and needs cutting. But the strength of the frame feels nice, also do the little rubber knobs on the landing gear.

Delivery on expected time to India, Build quality is good, very fulfilled

Delivery on expected time to India, Build quality is good, very fulfilled

Delivery on expected time to India, Build quality is good, very fulfilled